| |
Polar refrigerating compressed air dryers is
the best after -disposing machine for the air
compressors, and is the perfect clean machine in
air-power controlling, air-power tools,
precision machines, food packing, light
industry, textile industry, chemical industry
and so on.
.
The components of Polar product are imported
from famous factory in the world. Through
perfect structure, special designed pipeline
system, high-efficiency heat exchanger /
cooling-evaporator and gas-liquid separator, can
remove the moisture, oil drops and solid grain
from the compressed air. They have a advantages
that others do not have. If you choose it, you
will get the greatest worth.
|
|
| |
FEATURES AND BENEFITS |
|
| |
|
 |
The build Cin after cooler for high temp
type is suitable to operate at different
temperature below 80 |
|
|
|
The unit applies refrigerant pressure
control mode, which makes the air dew
point identically equal. |
|
|
|
The selected and used parts and
components are the products from famous
manufacturers in the world, which can
ensure operation reliability of the unit
. |
|
|
|
Cooling evaporator adopts the structure
of large heat-exchange area and detour
spiral . That makes the compress air
stay long inside the evaporator to
ensure sufficient heat exchange. More
moisture in the air can be condensed to
become liquid drop, and therefore
optimum drying effects can be achieved. |
|
|
|
The re-heating device makes heat
exchanging between the cold air and the
refrigerant high-pressure pipe, which
can exclude the condensation dew of
downstream pipe .This ensures the
reliability of the gydraulic system. On
the other hand ,the cold-media in high
pressure pipe flows into the condenser
only after it has been cooled .That can
reduce the load of the condenser and
increase COP(Coefficient of
performance),and therefore the dryer can
work normally even in harsh conditions . |
|
|
The design of inside piping system takes
various principles of compress air
purification into full consideration in
order to separate the moisture and most
remain solid grains and oil-drops, which
have been pre-treated when passing the
main pipe, from the compress air by
means of gravity separation, impacting ,
high speed centrifigalization ,
baffle-separation and diffusion , It
ensures the desiccaton and cleanliness
of output air ,and reduces the load of
air treating element in downstream to
minimum. |
|
|
Refrigerant: R-22 (can choose
R407C/R134a/R410a/R404a) |
|
|
| |
|
|
| |
|
|
| |
air
cooled type refrigerated compressor air dryer |
|
| |
-
have high temperature type or
low temperature type to choose.
inlet air temperature: high temperature
type 80 ‹‚»low temperature type 50 .
-
Power scour 1
220V 50(60)HZ( 14.2m3/min); 3 380V 50(60)HZ
-
compressed air capacity 0.47 m3/min -72.3 m3/min
-
matching air compressor 5HP-480HP (0.37KW-360 KW)
-
working press 0.15-1Mpa (1.5-10.2kgf/cm2)
 |
 |
|
| |
|
|
| |
water
cooled type refrigerated compressor air dryer |
|
| |
-
have high temperature type or
low temperature type to choose.
inlet air temperature: high temperature
type 80 ‹‚»low temperature type 50 .
-
Power scour 1
220V 50(60)HZ( 14.2m3/min); 3 380V 50(60)HZ
-
compressed air capacity 0.47 m3/min -300 m3/min
-
matching air compressor 5HP-2000HP (0.37KW-1500 KW)
-
working press 0.15-1Mpa (1.5-10.2kgf/cm2)
|
 |
|
| |
|
|
|
